Panasonic SDR-S10P Operating Instructions Manual page 109

Problem
"PUSH THE RESET
SWITCH." is
displayed.
If the SD card is
inserted in another
device, it is not
recognized.
≥ The unit has automatically detected an error. To
protect the data, remove the SD card and then press
the RESET button with a pointed object. This will
restart the unit.
≥ If you do not press the RESET button, the power to
this unit is turned off automatically about 1 minute
later.
≥ Even after you press the RESET button, the indication
may still appear repeatedly. If so, this unit needs
repair. Detach the power connected, and consult the
dealer who you purchased this unit from. Do not
attempt to repair the appliance by yourself.
≥ Check that the device is compatible with the capacity
or type of SD card (SD Memory Card/SDHC Memory
Card) that you inserted.
# Refer to the operating instructions of the device for
details.
Check points
Others
109
VQT1D97