Panasonic SDR-S10P Operating Instructions Manual page 11

∫ Charging the battery.
≥ Set the mode dial to OFF.
The battery cannot be charged
when this unit is turned on.
Connect the AC adaptor (supplied) A
to this unit and the AC outlet.
1
1 Slide the terminal cover lock to
OPEN and then open the terminal
cover.
2 Connect the AC cable to the AC
adaptor, then the AC outlet.
3 Connect the AC adaptor to this unit's
DC input terminal.
4.8V
3
2
∫ How to turn on the power
Set the mode dial to
.
≥ Align the desired symbol to the
position shown in the illustration.
∫ How to turn off the power
Set the mode dial to OFF.
∫ Inserting/removing the SD
card.
1 Slide the card/battery door lock to
OPEN and then open the card/
battery door.
≥ When the card/battery door does not
open, place your finger on the [
and open the card/battery door.
Before using
, , or
] part
11
VQT1D97