Panasonic SDR-S10P Operating Instructions Manual page 89

3
Connect this unit and a
computer.
A USB cable (supplied)
≥ Insert the plugs as far as they will
go. The unit and computer will not
operate properly if the plugs are
not inserted fully.
≥ Do not use any other USB
connection cables except the
supplied one.
(Operation is not guaranteed with
any other USB cables.)
4
5
A
≥ When the unit is connected to a
computer, its power cannot be
turned off.
In this case, disconnect the USB cable
(l 93).
≥ When a computer is accessing the
card in this unit, the card access lamp
lights. (
monitor.) Do not disconnect the USB
cable or AC adaptor while the card is
being accessed as it may damage the
data.
≥ It may be necessary to reboot the
computer after connecting this unit to it
for the first time.
Press the cursor button up or
down to select
[PC CONNECT], then press
the cursor button in the
center.
The [SD Browser auto start]
screen appears.
≥ If [Yes] is clicked,
MotionSD STUDIO starts. (l 92)
≥ Click [No] if you do not want to
start MotionSD STUDIO.
appears on the LCD
With a computer
89
VQT1D97