Panasonic SDR-S10P Operating Instructions Manual page 61

To set the white balance
manually
1
Select [ ] and then fill the
screen with a white subject.
MNL
2
Press the cursor button up to
select [ ].
MNL
When the [ ] display changes from
flashing to on, setting is complete.
≥ When the [ ] display continues
flashing, the white balance cannot be
set because the place is dark, etc. In
this case, use the automatic white
balance.
∫ About the white balance
sensor A
The white balance sensor detects the
type of light source during recording.
BACK
BACK BACK BACK
BACK BACK BACK
A
Do not cover the white balance sensor
during recording or it may not function
properly.
≥ When the [ ] display flashes, the
manual white balance previously
adjusted is stored.
Whenever recording conditions
change, re-set the white balance for
correct adjustment.
≥ When setting both the white balance
and the iris/gain, set the white balance
first.
Recording
61
VQT1D97