Messages - Panasonic SDR-S10P Operating Instructions Manual

Messages

CANNOT RECORD.
NO DATA.
THIS CARD CANNOT
RECORD IN VIDEO MODE.
CHECK CARD.
CARD LOCKED.
CARD FULL.
SCENE NUMBER IS FULL.
CANNOT RECORD. THE
NUMBER OF PROGRAM IS
FULL.
CARD DOOR OPENED.
ERROR OCCURRED.
RECORDING IS STOPPED.
Data writing to the SD card has failed.
There are no motion pictures or still pictures
recorded on the SD card.
If this message appears although data is recorded
on the SD card, the condition of the card is probably
not stable.
Turn off the power and then turn it on again.
An 8 MB or 16 MB SD card has been inserted in
video recording mode.
This card is not compatible or it cannot be
recognized by the unit.
The write protection switch on the SD card is set to
LOCK. (l 22)
The SD card is full or the number of scenes or
programs has reached the maximum limit so no
further data can be recorded. Delete unnecessary
scenes (l 70) or insert a new SD card.
The card/battery door is open. Close it.
≥ When using an SD card that can be used for
motion picture recording (l 22)
When this message appears, it is recommended
that you format the SD card being used. (l 74)
When an SD card is formatted, all the data recorded
on it will be deleted. Back up the data on the SD
card to a computer, etc. before formatting the SD
card.
≥ When using any other card
Use a Panasonic SD card or another SD card which
can be used to record motion pictures. (l 22)
Others
101
VQT1D97