DeDietrich GT 123 A Installation And Maintenance Manual page 12

Step four
Installing the burner
- Installing the burner fixing flange
See burner manufacturer instructions for burner installation.
Diagram 4.1 is for reference only.
Burner mounting tools are not supplied.
Fixing the burner to the boiler
Note:
When the connections have been made and the installation has
been filled with water, start the burner with reference to the
instructions provided with it.
Burner shown is for demonstration purposes, only. Consult
burner manufactures installation instructions.
The burner as supplied shall be installed according
to the manufacturers supplied documents and
installation requirements.
The fuel tank, fuel lines and filters and connection to
the burner must comply to all National and local
codes as required.
CSA B139 Oil
CSA B149 Gas
ANSI Z223 Gas
NFPA 31 Oil
The maintenance required for the burner and associated fittings, are described with each burner as supplied, consult
their documentation.
12
4.1
4.2
GT 120 A - GT 1200 A
1
09/02/08 - 94863361 - 85784009D