DeDietrich GT 123 A Installation And Maintenance Manual page 10

Remove the cast iron hinge pin for the burner door fixed by the 2
screws . Put the two screws
- Reinstall the cast iron hinge pin
side using the 2 screws
- Reinstall the hinge pins
nuts located on the burner door hinge pins, on the left side, as shown
on the adjacent figure.
- Tighten the 2 nuts.
Step three
GT120A boilers can be installed on an L160 or L250 domestic
hot water tank
- perform following operations:
Fixing the feet
- Screw the 4 adjustable feet (delivered in the hot water tank
instruction packet) to the base of the tank.
10
back on the right-hand side.
for the burner door on the left
.
on the left side, fixing them using the
, and .
2.2
2.3
GT 120 A - GT 1200 A 09/02/08 - 94863361 - 85784009D