Matrix H7XE-05 Service Manual page 68

CHAPTER 9: PART REPLACEMENT GUIDE
9.21 SLIDE FRAME REPLACEMENT - CONTINUED
11) Pull the nylon cord to rotate the pulley set 2 circles by counter-clockwise (Figure M).
12) To continue use one hand to fix the pulley set, then rotate the nylon cord 2 rotations counter-clockwise around into the pulley set (Figure N).
FIGURE M FIGURE N
13) Put the nylon cord upon the small pulley (Figure O).
FIGURE O
14) Reverse Steps 1-6 to recover the final assembly.
15) Test the bike for function as outlined in Section 9.24.
65