Precor P80 Operating And Maintaining page 108

Installing the Console
To thread the console cable assembly:
1.
2. Position the console over the console mount.
3. Rest the console on the console mount so that the notch
4. Tilt the console forward until it stops. Use one hand to
Make sure that as much of each cable as possible passes
through the opening in the middle of the console mount
on the base unit.
on the bottom of the console's back plate rests on the
rectangular hook at the bottom of the console mount, as
shown in the following figure.
Figure 9: Console positioning on base unit
steady the console in this position, or ask your assistant
to do so.
29