Ricoh MP C3504 Series User Manual page 213

Message
"Paper type of n is
mismatched. Select another
tray from the following and
press [Continue]. Paper
type can also be changed
in User Tools."
(A tray name is placed at
n.)
"Parallel I/F board has a
problem."
"Printer font error."
"Problems with the wireless
card. Please call service."
(A "wireless LAN board" or
"Bluetooth unit" is referred
to as a "wireless card".)
"Cannot print because both
the main and designation
(chapter) sheets are set to
the same paper tray. Press
[Job Reset] to cancel the
job. To print the job again
specify different trays."
Cause
The type of the paper in the tray
does not match the paper type
specified in the printer driver.
An error has occurred in the
IEEE 1284 interface board.
An error has occurred in the
font settings.
The machine has detected a
Bluetooth failure, or it could not
detect a Bluetooth unit. It may
be incorrectly installed.
The tray selected for other
pages is the same as the one
for slip sheets.
Messages Displayed When You Use the Printer Function
Solution
Select a tray containing paper that is
the same type as the specified paper
type.
Turn off the power, and then back on
again. If the message appears
again, contact your service
representative.
Contact your service representative.
Check that the Bluetooth unit is
installed properly, or contact your
service representative.
Reset the job. Be sure the tray you
select for slip sheets is not providing
paper for other pages.
211