Care And Maintenance; Protecting The Display Screen - Fujitsu ST4120P User Manual

Care and Maintenance

This chapter gives you pointers on how to care
for and maintain your Fujitsu Stylistic
ST4120P/21P Tablet PC.

PROTECTING THE DISPLAY SCREEN

The Fujitsu Stylistic ST4120P/21P Tablet PC is
designed to provide you with years of service.
Using a screen protector will help ensure that
the screen remains as clear as possible. When
installed, the screen protector becomes a
durable, replaceable writing surface that
protects the display screen from abrasion.
NOTE:
The Screen Proctector is sold separately,
please check with your dealer.
During normal use of the Pen Tablet PC,
small particles from the environment can
become embedded in the pen tip and
scratch the screen. To prevent scratching
the screen, ensure that a screen protector
is installed before using your Pen Tablet
PC. The warranty does not cover a screen
that is scratched as a result of not using a
screen protector.
To install a new screen protector on your Pen Tablet
PC:
1. If a screen protector is already installed on
the display screen, remove it before installing
the new screen protector.
The screen protector is held onto the display
screen surface by a thin strip of adhesive
around the edges. A notch in one corner of
the screen protector allows you to slide your
fingernail under the screen protector for easy
removal.
2. Clean the display by wiping the screen
gently using a soft cotton cloth dampened
with isopropyl alcohol. Ensure that all residue
has been removed from the screen before
applying a new screen protector.
C a r e a n d M a i n t e n a n c e
3. Remove the protective coating from the
adhesive side of the screen protector first,
as shown in Figure 3-1.
• The Fujitsu Stylistic ST4120P/21P Tablet
PC is not water- proof. Do not pour liquids
on the system or wash it with a heavily
soaked cloth.
• Do not place items on the top of the display,
or damage may occur.
Figure 3-1 Removing the Protective Sheet
4. Apply the screen protector to the display
screen surface. When doing so, orient the
screen protector with the adhesive side of
the screen protector facing the display
screen and the notched corner of the screen
protector oriented as shown in Figure 3-2.
Figure 3-2 Installing the screen protector
31