Fujitsu ST4120P User Manual page 74

F u j i t s u S t y l i s t i c S T 4 1 2 0 P / 2 1 P Ta bl e t P C U s e r 's G u i d e - S e c t i o n O n e
Problem
I want to remove
the driver
(Windows 2000)
64
Possible Cause
Windows 2000:
When removing the driver, make sure that the device
is attached to the computer. If you try to remove the
driver while the device is detached from the
computer, the driver is not removed.
1. Right click the [My Computer] icon on the
2. Click the [Hardware] tab.
3. Click [Device Manager...]. The [Device Manager]
4. Click [+] beside [Network adapters].
5. Right click [Intersil PRISM Wireless LAN PCI
6. Click [OK].
7. Close [System Properties]. Make sure that the
8. Click [Start] -> [Settings] -> [Control Panel].
9. Double-click [Add/Remove Programs]. [Add
10. Perform the following steps.
11. A window appears asking you if you really want
12. Click [Yes]. When the driver is removed, a
13. Click [OK].
14. Close [Add/Remove Programs] and [Control
15. Shut down Windows, and turn off the computer.
Possible Solution
desktop, and then click [Properties] from the
menu that appears. [System Proper-ties]
appears.
window appears.
Card], and click [Uninstall] from the menu that is
displayed. [Confirm Device Removal] appears.
icon has disap-peared from the task tray in the
lower right corner of the screen.
Remove Pro-grams] appears.
• Click [PRISM 11Mbps Wireless LAN for
Windows].
• Click [Change/Remove].
to remove the driver.
window appears showing that the driver has
been removed.
Panel].