Connecting Windows 2000 Systems - Fujitsu ST4120P User Manual

F u j i t s u S t y l i s t i c S T 4 1 2 0 P / 2 1 P Ta bl e t P C U s e r 's G u i d e - S e c t i o n O n e
CONNECTING WINDOWS 2000
SYSTEMS
This chapter describes how to set the wireless
LAN connection for computers running
Windows 2000.
When you receive your Fujitsu Stylistic
ST4120P/21P Tablet PC, the integrated
wireless LAN device and drivers have
already been installed. This procedure
outlines the steps for setting the device
parameters.
Workflow
The proper setup of the wireless LAN
connection requires that several steps be
performed in the proper order. Following is a
general outline of the steps to be performed.
Each step is detailed later in this procedure.
1. Setting parameters
• Setting the profile
• Setting the encryption
2. Network settings
• Setting the protocol and checking the
network
• Setting file and printer sharing
• Checking the connection
Setting Parameters
1. Click [Start]-> [Settings] -> [Control Panel].
2. Double-click the [PRISM Settings] icon. The
[PRISM Wireless Settings] appears.
3. Set the profile as specified in Table 1. Ask
your network administrators to check the
setting.
4. When you finish your entry, click [Apply].
Table 1: Profile Parameters
50
Description
Item
Profile
Enter the system file name in which
the parameter information is to be
saved.
Ad Hoc Network: Click the down
Mode
arrow and select "802.11 AdHoc".
Infrastructure Network: Click the
down arrow and select
"Infrastructure".
Enter the network name to
SSID
which you want to connect
Obtain the information from
Transmit
Rate
your network administrator. If
you do not have a network
administrator, select "Fully
Automatic".
Not supported.
Power
Save
Enabled
AdHoc Network: Select the
AdHoc
Channel
same channel, 1-11, for all
connected computers. If there is
more than one wireless LAN
nearby (such as on the same
floor), we recommend that the
channels for each LAN be 5
numbers apart (e.g., if there are
two other LANs nearby, the
channels used should be 1,
6, and 11).
Infrastructure Network: Not an
option.
Table 1: Profile Parameters