Icom iM504 Instruction Manual page 31

When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is con-
nected, steps r and t (Current position/time program-
ming) do not appear. Go to step y.
r The position information appears. Set your position (lati-
tude and longitude) data by rotating [DIAL].
• Push [16•9] or [CH/WX•DUAL•U/I/C] to move the cursor forward
or backward, respectively.
• Rotate [DIAL] to edit N; North latitude or S; South latitude when
the cursor is on the 'N' or 'S' position, and W; West longitude or
E; East longitude when the cursor is on the 'W' or 'E' position.
• Push [CLR] for 1 sec. to clear the latitude/longitude data.
• Push [CLR] to cancel and return to the DSC menu.
--DSC Menu--
Input Position
Latitude
__°__.___N
Longitude
__°__.___W
<CLR <CLR 1sec 1sec˘Null
<CLR <CLR ˘Exit Exit / ENT
t After setting the position data, push [DIAL•ENTER] to set
the current UTC time. Set the current UTC time by rotating
[DIAL], then push [DIAL•ENTER].
• Push [16•9] or [CH/WX•DUAL•U/I/C] to move the cursor forward
or backward, respectively.
• Push [CLR] for 1 sec. to clear the UTC time data.
• Push [CLR] to cancel and return to the DSC menu.
Null
Null
Null Data> Data>
ENT˘OK> OK>
--DSC Menu--
Input UTC Time
__:__
<CLR <CLR 1sec 1sec˘Null
<CLR <CLR ˘Exit Exit / ENT
y Push [DISTRESS] for 5 sec. to transmit the distress call.
• While pushing [DISTRESS], the key backlighting blinks.
u After transmitting the distress call, the transceiver waits for
an acknowledgment call on Channel 70.
• The distress call is automatically transmitted every 3.5 to 4.5 min.
• After 2 sec., the transceiver is set to Channel 16 automatically.
Distress Call
TX Complete
Now Waiting for ACK
<CLR <CLR ˘Cancel Cancel ACK>
25W
TAG
After 2 sec.
Wait ACK
<CLR ˘
Cancel ACK>
6
DSC OPERATION
Null
Null Data> Data>
ENT˘OK> OK>
ACK>
INT
CALLING
6
25