Icom iM504 Instruction Manual page 40

6
DSC OPERATION
D D Transmitting a position report call
Transmit a position report call when you want to announce
your own position to a specific ship and to get an answer, etc.
q Push [MENU] to enter the DSC menu.
w Rotate [DIAL] to select "P P o o s s i i t t i i o o n n R R e e p p o o r r t t ," push
[DIAL•ENTER].
• "P P o o s s i i t t i i o o n n I I n n p p u u t t " item appears when a GPS receiver
(NMEA0183 ver. 2.0 or 3.01) is not connected.
Select Item
Position Input
Individual Call
Group Call
All Ships Call
Position Request
˘Position Report
e Rotate [DIAL] to select the desired pre-programmed indi-
vidual address
[DIAL•ENTER].
• The ID code can be set in advance. (p. 17)
• When "M M a a n n u u a a l l I I n n p p u u t t " is selected, set the 9-digit MMSI
number for the individual you wish to call by rotating [DIAL].
Select Address
Manual Input
John
˘Paul
George
Michael
<CLR˘Exit / ENT˘OK>
34
--DSC Menu--
"M M a a n n u u a a l l I I n n p p u u t t ,"
or
--DSC Menu--
When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is con-
nected, steps r and t (Current position/time program-
ming) do not appear. Go to step y.
r The position information appears. Set your position (lati-
tude and longitude) data by rotating [DIAL].
• Push [16•9] or [CH/WX•DUAL•U/I/C] to move the cursor forward
or backward, respectively.
• Rotate [DIAL] to edit N; North latitude or S; South latitude when
the cursor is on the 'N' or 'S' position, and W; West longitude or
E; East longitude when the cursor is on the 'W' or 'E' position.
• Push [CLR] for 1 sec. to clear the latitude/longitude data.
• Push [CLR] to cancel and return to the DSC menu.
Input Position
Latitude
Longitude
push
t After setting the position data, push [DIAL•ENTER] to set
the current UTC time. Set the current UTC time by rotating
[DIAL], then push [DIAL•ENTER].
• Push [16•9] or [CH/WX•DUAL•U/I/C] to move the cursor forward
or backward, respectively.
• Push [CLR] for 1 sec. to clear the UTC time data.
• Push [CLR] to cancel and return to the DSC menu.
--DSC Menu--
__°__.___N Null
__°__.___W Null
<CLR 1sec <CLR 1sec˘Null Null Data> Data>
<CLR ˘Exit <CLR Exit / ENT ENT˘OK> OK>