Outgoing Messages; Turning Answering Machine On/Off - Topcom BUTLER 2950 User Manual

Hide thumbs Also See for BUTLER 2950:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Topcom Butler 2950
Key
Press key briefly
Play OGM
1
1,2
Playback messages
2
None
3
Set volume
4
speech +ringing
Select OGM
/
5
Play VIP-code
6
Current number of
7
ring tones
Playback Time
8
None
9

9.3 OUTGOING MESSAGES

Two outgoing messages of 2 minutes can be recorded (OGM1 and OGM2).
Outgoing message 1 for the answering function and possibility for callers to leave a
message.
Outgoing message 2 for the answering function without allowing callers to leave a messages on the machine.
9.3.1 Recording outgoing messages (OGM 1 or OGM 2)
Press the
/ -key to select the OGM.
A voice will playback the recorded OGM
Press the
-key for two seconds
1,2
Record the outgoing message after the beep
Press the Stop
-key to stop recording.
Note: The recording cannot exceed 2 minutes. If no outgoing message is recorded, the prerecorded outgoing
message is used.
9.3.2 Playback the Outgoing Message
To check the outgoing message now set:
Press the
-key.
1,2
Note: To stop playing the welcome note briefly press the Stop
9.3.3 Select outgoing message
Press the
/ -key to switch between the 2 outgoing messages.
The internal voice will confirm the set outgoing message.
Notes:
It is only possible to select an outgoing message if the answering machine is turned on.
If the memory is full, only outgoing message 2 can be selected (only answering without recording messages)
9.3.4 Erasing the Outgoing Message
If you erase the outgoing message, the default message will be played 'Please call later' .
Erase the outgoing message as follows:
Select the desired outgoing message by pressing the
Press the
key to play the outgoing message.
1,2
Keep the
key pressed down when the OGM is played back.

9.4 TURNING ANSWERING MACHINE ON/OFF

If the answering machine is on, the -LED will light up and the machine will
automatically pick up the line after a number of rings (see 'Setting Number of Rings').
12
Stand-by mode
press key for 2 seconds
Record OGM
None
Record memo
None
Switch On-Off
Set VIP-code
Set numbers of
ring tones
Set date/time
Delete all messages
During message
play-back
Go to previous message
Pause
Skip message
Set volume
Stop
None
None
None
Delete message or
delete OGM
-key .
/ -key.
Topcom Butler 2950

Advertisement

Table of Contents
loading

This manual is also suitable for:

Butler 3250

Table of Contents