Table of Contents
Advertisement
Available languages
Available languages
11.2 Calling a Direct Memory number
•
Press the desired Direct Memory key, the stored number is displayed.
•
Press handsfree
or pick up the handset.
12 Sleep mode
To avoid that you are disturbed during a specific period, you can activate the sleep mode.
The telephone will not ring during sleep mode, except for calls dedicated as VIP in the call
list. VIP calls will always ring.
Once the sleep mode time is past, the telephone will always ring.
•
Press
for 2 seconds
•
Press
repeatedly to select the sleep time (0-24 hours in steps of 1 hour)
•
Press
to confirm
To disable the sleep mode, follow the same steps and select 00-00.
13 Answering machine
13.1 Recording an outgoing messages (OGM)
13.1.1 OGM1
OGM1 is the Outgoing Message that each caller will hear when your answering device
answers the call.
To record the Outgoing Message 1:
•
Press and hold
.
•
After you hear a beep, release
seconds).
•
Press
again to end recording.
•
The device will playback the recorded message after a beep.
To check your OGM1 again, press
When no outgoing message is recorded, a pre-programmed OGM will be used.
13.1.2 OGM2
OGM2 is the message that the caller will hear that is calling from the telephone number which
is set in the menu 'OGM2 CID NO'.
When the Allure 270 receives the preprogrammed Caller ID number, this message will be
playbacked instead of OGM1. With this function you can record dedicated messages for one
person.
Topcom Allure 270
and start saying your outgoing message (max 30
briefly.
Topcom Allure 270
33
Advertisement
Chapters
Table of Contents
