Disassembly Of Asf Part - Epson GT-7000 Service Manual

EPSON GT-7000

7.4.2.1 Disassembly of ASF Part

1. In order to remove the cover, remove 2 screws(black, CB + washer)
located on the right and left edges of the front cover. Flip over and
remove 2 screws (gold, P-tite+ washer) from the bottom, then
remove the cover.
Remove 2 screws
Figure 7-14. Removing a cover
Remove 2 screws.
Figure 7-15. Bottom of ADF
Rev. C
2. Flip over the ADF again. Remove 4 screws (gold, P-tite + washer),
10070006
See the figure on the next page.
10070009
and remove Motor/ Solenoid Assembly.
Since one of the screws** is used as a stopper at
C A U T I O N
the slide gear part, be careful when removing the
screw because all gears will jump out.
(See figure7-17 on next page)
Figure 7-16. Motor/Solenoid Assembly
Chapter 7 Appendix
10070010
68