Epson GT-7000 Service Manual page 48

EPSON GT-7000
7. Disconnect the CR motor unit cable from the main board connector,
and remove the CR motor unit.
8. Remove the timing belt from the CR motor unit.
1. Remove "E" shaped ring.
2. Remove transmission gear.
3. Remove the timing belt from the driven pulley.
Rev. A
Chapter 4 Disassembly and Assembly
Figure 4-22. CR Motor Unit Removal(2)
T i m i n g B e l t
T r a n s m i s s i o n G e a r
" E " - R i n g
Figure 4-23. Timing Belt Removal
C o n n e c t o r
( l o c k t y p e )
C a r r i a g e M o t o r
U n i t
41