EPSON GT-7000
7.3 Optional Part; ADF
7.3.1 General Description
Features
Compact and Light weight (319(W) x 451(D) x 137(H) mm),
Approx. 2.2Kg
Capacity of paper setting is up to 20 pieces.
Scanning speed is 3 PPM(at A4, Line art, 300 dpi, and Draft
mode)
Using a transparency film to scanning area. User can change
the transparency film. (10 k-pieces of paper are readable by one
transparency film)
Connectivity
This Automatic Document Feeder can use only for GT-7000 series.
Figure 7-6. ADF mounted on the GT-7000
Rev. C
7.3.2 Specification
7.3.2.1 General Specification
Product type:
Sheet through
Paper supply:
Face up load
Paper out:
Face down eject
Separate paper way:
Friction by roller
Paper setting quantities: 20 pcs ( at 55g/m
thickness is less than 4mm)
Original point:
Opposite side against Scanner original point
Scanning area:
Scanning through a Transparency sheet
Document setting position:Set the left side of Document to the left
side of ADF's paper setting and support
the right side of Document by ADF's
paper guide.
7.3.2.2 Efficiency
Noise:
54dB or lower, No unplesant and abnormal noise
Miss feed ratio:
1% or lower
Jam ratio:
1% or lower (0.1% or lower, at XEROX-P and
room temperature)
Pile up feed ratio: 1% or lower
Skew:
Less than
Original point accuracy: 0
±
Documet top edge
Feeding pitch accuracy: Less than
Chapter 7
Appendix
2
paper, Maximum total
±
°
0.5
C
3mm, from Document left edge and
±
1%
62