Epson GT-7000 Service Manual page 53

EPSON GT-7000
7. Remove 2 gold screws(CBS, 3x4) securing the shield board of the
power board, and remove the shield board toward inside of the
body.
8. Disconnect the connector(lock type; push and release) and remove
5 gold screws(CBS, 3x4) and power board from the shield board.
C B S ( M 3 x 4 )
Figure 4-31. Power Board Removal(1)
Rev. A
S h i e l d B o a r d
Chapter 4 Disassembly and Assembly
C B S ( M 3 x 4 )
C o n n e c t o r
C B S ( M 3 x 4 )
Figure 4-32. Power Board Removal(2)
Figure 4-33. Power Board
46