Removing and installing components
This section provides detailed information on how to remove or install the components from your
computer.
Recommended tools
The procedures in this document require the following tools:
•
Small flat blade screwdriver
•
Phillips #0 screwdriver
•
Phillips #1 screwdriver
•
Hex screwdriver
•
Small plastic scribe
Press latch doors
Opening the press latch doors
The computer includes six press latch doors:
•
Three on the back of the computer
•
Two on the right side of the computer
•
One on the left side of the computer
1.
Slide the latch until the unlock icon is visible.
2.
Press the latch and open the press latch door in the downward direction.
Closing the press latch doors
1.
Close the latch door back by pressing it toward the computer.
2.
To lock the latch doors, slide the latch until the lock icon is visible.
3
15