Installing the optical drive
1.
Insert the optical drive into the slot on the computer.
2.
Tighten the screws to secure the optical drive to the computer.
3.
Install:
a.
hard drive
b.
battery
4.
Follow the procedure in
Base cover
Removing the base cover
1.
Follow the procedure in
2.
Remove the:
a.
battery
b.
hard drive
c.
optical drive
3.
To release the base cover:
a. Unlock the I/O latch door [1].
b. Lift the latch door to open it [3].
c. Remove the screws that secure the base cover to the computer [3].
4.
To remove the base cover:
a. Remove the screws that secure the base cover [1].
b. Lift the base cover away from the computer [2].
20
After working inside your
Before working inside your
computer.
computer.