Installing the driving board
1.
Place the driving board on the computer.
2.
Tighten the screws that secure the driving board on the computer.
3.
Connect the I/O board cable.
4.
Affix the adhesive tape.
5.
Connect the display assembly cable
6.
Affix the adhesive tape.
7.
Install:
a.
base cover
b.
hard drive
c.
optical drive
d.
battery
8.
Follow the procedure in
Battery connector
Removing the battery connector
1.
Follow the procedure in
2.
Remove the:
a.
battery
b.
hard drive
c.
optical drive
d.
base cover
e.
I/O board
After working inside your
Before working inside your
computer.
computer.
43