Other Messages; Garo Wxxxx (X Represents A Number); Error Exxx-Xxxx (X Represents A Letter Or Number); Hardware Error. Xxxxxxxx-Xxxx (X Represents A Letter Or Number) - Canon ipf6350 User Manual

Other Messages

GARO Wxxxx (x represents a number) ......................................................................................................... 1065

ERROR Exxx-xxxx (x represents a letter or number) .................................................................................... 1065

Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ................................................................. 1065

Prepare for parts replacement. ...................................................................................................................... 1066
Parts replacement time has passed. ............................................................................................................. 1066
Unknown file. ................................................................................................................................................. 1066
Calibration There is a problem with the multi-sensor. .................................................................................. 1066
Multi-sensor error .......................................................................................................................................... 1067
GARO Wxxxx (x represents a number)
Cause
There is a problem with the print job.
ERROR Exxx-xxxx (x represents a letter or number)
An error requiring service may have occurred.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
The last portion of roll paper was used during a print job.
The paper was not advanced because the trailing edge is ta-
ped to the roll.
Fastening tape or the Belt Stopper has not been removed in-
side the Top Cover.
An error requiring service may have occurred.
iPF6350
Downloaded from ManualsPrinter.com Manuals
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
Cause
Write down the error code and message, turn off the printer, and con-
tact your Canon dealer for assistance.
Cause
Error Message
Corrective Action
Corrective Action
Corrective Action
Turn off the printer and remove the roll from the printer
before restoring power.
Turn off the printer, open the Top Cover and remove
the tape or the Belt Stopper before restoring power.
Turn off the printer and wait at least three seconds be-
fore restoring the power.
If the message is displayed again, write down the error
code and message, turn off the printer, and contact your
Canon dealer for assistance.
GARO Wxxxx (x represents a number)
> Other Messages >
13
1065