Changing The Type Of Paper - Canon ipf6350 User Manual

Hide thumbs Also See for ipf6350:

Table of Contents

• For details on types of paper to select, see the Paper Reference Guide. (See "Types of Paper.")

Close the Roll Feed Unit Cover.

• Adjusting the printhead alignment with the type of paper to be used in printing may enhance printing

• Cut the edge of the roll after the paper is advanced if it is creased or soiled, or if you have cut it with

scissors or a blade. (See "Specifying the Cutting Method for Rolls.")

Changing the Type of Paper

Follow these steps to change the type of paper specified on the printer after you have loaded paper.

If you will continue using this type of paper later, selecting Keep Paper Type > On will save the time and effort of config-

uring the media type setting when you load the paper again. The current media type settings before you select On will be

automatically selected at that time. (See "Using the Same Type of Paper Regularly.")

• For best printing results, the printer fine-tunes the feed amount for each type of paper. Be sure to select the

type of paper to use correctly before printing.

• Because the printer fine-tunes the feed amount for each type of paper, the margins and the size of printed

images may vary depending on the type of paper used. If margins and the size of images are not as you ex-

pected, adjust the paper feed amount.

(See "Adjusting the Feed Amount.")

Changing the Type of Paper

• After you load a roll, the printer automatically shows a menu for selection of the type of paper on the Display

Screen. Select the type of paper and press the OK button.

If no barcode has been printed on the roll and you have set ManageRemainRoll to On, specify the roll

length after the type of paper. (See "Specifying the Paper Length.")

Downloaded from ManualsPrinter.com Manuals

(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")

Handling Paper

Handling rolls

Changing the Type of Paper