The Paper Is Too Small; Paprwidth Mismatch - Canon ipf6350 User Manual

Hide thumbs Also See for ipf6350:
Table of Contents

Advertisement

Error Message
>
When Detect Mismatch in the Control Panel
menu is set to Warning, paper smaller than
the size specified in the printer driver is loa-
ded.

The paper is too small.

The loaded paper is too small.
(When you have attempted to print a test
print sheet or other printer status informa-
tion.)

PaprWidth Mismatch

When Detect Mismatch in the Control Panel menu
is set to Pause or Warning, the width of the loaded
roll does not match the width specified in Fit Roll
Paper Width in the printer driver.
13
1044
The paper is too small.
Downloaded from ManualsPrinter.com Manuals
Messages regarding paper
>
Cause
Cause
Cause
Corrective Action
You can continue to print, but note that this error may cause problems
in the printing results.
Corrective Action
Replace the roll with a roll 10 inches in width or larger as follows.
1. Press ▲ or ▼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
2. Replace the roll with a roll 10 inches wide or larger.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Press ▲ or ▼ to select Print, and then press the OK button to
resume printing.
However, note that this error may cause paper jams and affect
the printing quality.
Press ▲ or ▼ to select Stop Printing, and then press the OK
button.
Follow these steps to replace the roll to match the width speci-
fied in the printer driver.
1. Press ▲ or ▼ to select Change Paper, and then press the
OK button.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
2. Replace the paper with paper compatible for borderless print-
ing.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Make sure the roll width selected in the dialog box displayed
when you select Fit Roll Paper Width in the printer driver
matches the width of the roll loaded in the printer, and then try
printing again.
→P.784
→P.786
→P.774
→P.778
Corrective Action
→P.784
→P.786
→P.774
→P.778
iPF6350

Advertisement

Table of Contents
loading

Table of Contents