Banding In Different Colors Occurs - Canon ipf6350 User Manual

Troubleshooting
Colors have not been adjusted on the computer or monitor.
The Printhead nozzles are clogged.
In the Windows printer driver, Application Color Matching Pri-
ority is not selected.
There may be a slight difference in how colors are printed after
Printhead replacement because of individual variation among
printheads.
Printhead characteristics gradually change through repeated use,
and colors may change.
Color may change slightly even on the same model of printer if
you use a different version of the firmware or printer driver, or
when you print under different settings or in a different printing
environment.
When reinstalling the printer driver, you changed the region selec-
tion of the Media Configuration Tool.
Changing the region selection of the Media Configuration Tool
deletes the region-specific paper information originally registered
on the printer before installation. Using paper with deleted infor-
mation when executing color calibration will prevent the resulting
calibration adjustment value from being applied to all other types
12
of the paper.

Banding in different colors occurs

The paper feed amount is out of ad-
justment.
1022
Printing does not proceed smoothly
because print jobs are interrupted
during transmission.
In the Control Panel menu, Adj.
Priority is set to Print Length.
Banding in different colors occurs
Downloaded from ManualsPrinter.com Manuals
> Problems with the printing quality
Cause
Cause
Adjust the feed amount.
(See "Adjusting the Feed Amount.")
If printed sheets are affected by banding in different colors by the trailing edge
(about 20–30 mm (0.8–1.2 in) from the edge), try adjusting the feed amount of
the trailing edge of sheets.
(See "Adjusting Color on the Trailing Edge of Sheets.")
Exit other applications and cancel other print jobs.
Setting Adj. Priority to Print Quality in the Control Panel menu and adjusting
the feed amount may improve results.
(See "Adjusting the Feed Amount.")
>
Refer to the computer and monitor documenta-
tion to adjust the colors.
Adjust the settings of the color management soft-
ware, referring to the software documentation as
needed.
Print a test pattern to check the nozzles and see if
they are clogged.
(See "Checking for Nozzle Clogging.")
→P.973
Click Special Settings on the Layout sheet of the
printer driver and select Application Color
Matching Priority in the dialog box.
Execute color calibration.
Execute color calibration.
Follow these steps to prepare the printing envi-
ronment.
1. Use the same version of firmware or printer
driver.
2. Specify the same value for all settings items.
3. Execute color calibration.
Prepare paper compatible with calibration in the
newly selected region and perform calibration
again.
Corrective Action
→P.827
→P.827
Corrective Action
→P.834
iPF6350