The Back Side Of The Paper Is Dirty; Roller Marks Are Left Across The Trailing Edge Of Paper; Immediately After Borderless Printing, The Trailing Edge Margin Is Soiled During Regular Printing; Printed Colors Are Inaccurate - Canon ipf6350 User Manual

Hide thumbs Also See for ipf6350:
Table of Contents

Advertisement

Cause
You are using a paper that
does not dry easily.

The back side of the paper is dirty

The Platen has become dirty after borderless printing or printing
on small paper.
The Paper Retainer is soiled.

Roller marks are left across the trailing edge of paper

The paper was removed without pressing the OK
button after printing from the Front Paper Feed Slot.
Immediately after borderless printing, the trailing edge margin is soiled during regular
printing
Depending on your printing environment, af-
ter borderless printing in which the leading
and trailing edge of the roll is cut automatical-
ly, any ink adhering to the cutter unit may rub
off on the next printed document.

Printed colors are inaccurate

Color adjustment has not been activated in the Advanced Settings
of the printer driver.
iPF6350
Downloaded from ManualsPrinter.com Manuals
When paper that does not dry easily is used for printing, it may curl during printing
and touch the Output Tray.
In this case, in the Control Panel menu, set Scan Wait Time to an option other than
Off.
However, note that printing will now take longer.
(See "Menu Settings.")
Cause
Cause
Cause
Follow these steps to change the Between Pages setting of Drying
Time to a value between about 30 seconds and 3 minutes before try-
ing borderless printing again.
1. On the Main sheet of the printer driver, click Advanced Settings
2. Select an ink drying time in the list for the Between Pages setting
Cause
Troubleshooting
Corrective Action
→P.894
Open the Top Cover and clean the Platen.
(See "Cleaning Inside the Top Cover.")
Clean the Paper Retainer.
(See "Cleaning Inside the Top Cover.")
Corrective Action
Following the instructions displayed, press the OK button, and
after removing the paper, press the OK button again.
Wipe the rollers to clean them.
(See "Cleaning Inside the Top Cover.")
(See "Cleaning the Paper Retainer.")
Corrective Action
by Media Type.
of Drying Time.
In the Advanced Settings of the printer driver,
access Color Settings in Color Mode to adjust
colors.
>
Problems with the printing quality
Corrective Action
→P.991
→P.991
→P.991
→P.994
Corrective Action
The back side of the paper is dirty
>
12
1021

Advertisement

Table of Contents
loading

Table of Contents