Specifying Netware Print Services - Canon ipf6350 User Manual

Hide thumbs Also See for ipf6350:
Table of Contents

Advertisement

Network Setting
Note
• If an error message is displayed, check the settings and correct any invalid values.
• To cancel this process, press the Back button.

Specifying NetWare Print Services

Before printing in a NetWare network, you must configure print services such as print servers, print queues, and so on. You
can configure the print service settings from a computer using any of the following Novell software provided with NetWare.
• NWADMIN
• PCONSOLE
Important
• If you use NWADMIN to configure the print service settings, Novell Client (the Novell NetWare client soft-
ware) must be installed as the client software application.
• NetWare networking is unsupported in Windows Vista, Windows Server 2008 and Windows 7.
This topic gives instructions for configuring NetWare print services. The order of this procedure may vary depending on the
environment.
Choosing the type of print services
Before completing print service settings, choose the type of print service. Refer to the following descriptions as needed.
Note
• In NetWare 5.1 or 6.0, NDPS may also be used as the print service. If you use NDPS, use the Novell printer
gateway included with NetWare. For details on configuring NDPS, refer to the NetWare documentation.
10
• NDS (Novell Directory Service) and bindery
NDS and bindery are both supported. Use the mode that is compatible with your network environment.
• Queue server mode and remote printer mode
Queue server mode and remote printer mode are both supported.
• Queue server mode
When using queue server mode, all print server functions are supported, so there is no need for other print server
software or hardware. In NDS queue server mode (NDS PServer), the NDS print server is used for printing. In
bindery queue server mode (Bindery PServer), the bindery print server is used for printing. Note that if you use
queue server mode, a NetWare user license is required for each network interface.
• Remote printer mode
In remote printer mode, the printer is controlled by the NetWare print server. Thus, a NetWare print server is re-
quired. In NDS remote printer mode (NPrinter), the NDS print server is used for printing, and in bindery remote
printer mode (RPrinter), the bindery print server is used for printing.
950
Using NWADMIN or PCONSOLE to set up the print server
Use NWADMIN to set up the print server if NDS queue server mode or remote printer mode is used.
1.
Log into NetWare as Administrator or with equivalent rights, and then start NWADMIN.
2.
Run Quick Setup.
1.
Choose Print Services Quick Setup in the Tools menu.
Specifying NetWare Print Services
Downloaded from ManualsPrinter.com Manuals
>
Network Setting (Windows)
>
iPF6350

Advertisement

Table of Contents
loading

Table of Contents