Setting Contact Names To Display During Calls; Setting Dialing Options - Avaya 9608 User Manual

Avaya Menu
8. Press Save.

Setting contact names to display during calls

You can set your phone to show the contact's name rather than the calling party name for an
incoming or answered call, a transferred call, or conference call when a calling or called party
number matches a number on your Contacts list.
Procedure
1. Press Home.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Pair Contacts to Calls.
7. Press Change or OK to change the setting to On or Off.
8. Press Save.

Setting dialing options

About this task
Your phone has two dialing options. You can dial as you normally would, for example, pick up
the handset, get a dial tone, and dial the number you want (off-hook dialing). Or, you can set
"edit dialing" which mimics how you dial a call on a cell phone - you can enter all or part of the
number, backspace to correct a digit if needed, and when ready, initiate the dialing process
using a softkey.
Note:
Edit dialing may not be available to you, depending on how your system is administered.
Procedure
1. Press Home.
2. Select Options & Settings or Phone Settings.
22 Using Avaya IP Deskphone H.323 9608, 9608G, and 9611G
Note:
Depending on how your administrator has configured your deskphone, you might
not have the option to change the audio path as stated above.
Comments? infodev@avaya.com
January 2014