Table of Contents

Advertisement

SIDE DOORS

Side doors can be locked
/unlocked from inside the vehicle by
pressing buttons
/
ly in the switch box (See Fig. 6а) or
(in the design variant) by pressing
button
in the driver's door mod-
ule (Fig. 6b); pressing this button you
change the state of doors' locks.
Locking front doors is possible only if
the doors are closed.
Side doors are opened from the
outside – with the help of the handle
in the direction of the arrow (Fig. 3),
and from the inside – by turning over
internal handle 2 (Figs. 4 and 5). If
the door is locked, the handle is idle.
To roll up and down windows of
front and rear doors (in the design
variant) use switch buttons of elec-
tric window regulators on door trim
panels. To roll up any window just
pull up appropriate power window
switch: on the passenger's door trim
panel, or in the switch box (Fig. 6а)
or (in the design variant) in the dri-
ver's door module (Fig. 6b). To roll
down any window, press down
appropriate power window switch.
After stopping pressing the button
12
respective-
Fig. 3. Opening the door
will be automatically set to middle
position, and the window will be
stopped at any position you have
selected.
Driver's door module
(in the design variant)
Assignment of driver's door mod-
ule (DDM) switches as shown in
Fig. 6b:
1 – electric mirror control switch
(joystick) in the horizontal and verti-
cal directions;
2, 3 – selection buttons of mirror
for control (right or left);
4–7 – window regulator control
buttons (corresponding to the loca-
tion of windows in the vehicle);
Fig. 4. Left hand front door
Fig. 5. Right hand front door
8 – lock and unlock button for
side doors of the vehicle;
9 – power on or off button for rear
power windows.
To control mirrors you need to
switch on the ignition and press
appropriate button to select a mirror.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents