Transferring A Call Using The Intercom - Panasonic KX-TG2670N Operating Instructions Manual

During an intercom call:
•Intercom calls can only be ended with the handset.
•If the handset user has difficulty hearing the base unit user, decrease the
base unit speaker volume by pressing Ö.
•If an incoming call is received, the intercom call stops and the unit starts to
ring. To answer, if you are using the handset, press
are using the base unit, press (DIGITAL!SP-PHONE).

Transferring a Call Using the Intercom

The intercom can be used during a call. This feature enables you to
transfer a call between the handset and the base unit.
From the handset to the
base unit
Handset:
1
During a call, press
(INTERCOM)
paged party after the beeps.
•The call is put on hold and
"Intercom hold" is displayed.
•If the base unit user does not
answer, press
2 Base unit:
When the paging party's
voice is heard, answer using
the MIC.
3 Base unit:
To answer the call, press
(DIGITAL!SP-PHONE)
•The transfer is complete.
. Talk to the
or
.
.
or
From the base unit to the
handset
Base unit:
1
During a call, press
(LOCATOR/INTERCOM)
•The call is put on hold and
"Paging" is displayed.
•If the handset user does not
answer, press
(DIGITAL!SP-PHONE).
Handset:
2
Press
(INTERCOM)
the page.
3 Handset:
To answer the call, press
or
•The transfer is complete.
. If you
.
to answer
.
51