Panasonic KX-TG2670N Operating Instructions Manual page 59

8 Press (Save key).
á
•A beep sounds.
•To return to the standby mode, press (OFF).
* Pager companies require a delay after the pager number and/or the
access code is dialed. Contact your pager company regarding the
required pause time. Pressing
3.5 second delay and counts as one digit.
•If the line has rotary or pulse service, press (TONE) between the pager number
and (REDIAL/PAUSE) in step 7.
Storing a 1-800 pager number
If you use a 1-800 pager number with a PIN code, store the pager
number as follows.
1 Follow steps 1 through 6 on page 58.
# Enter the 1-800 pager number, and press
2
3 times.*
$ Enter the PIN code, and press
•The entered number is displayed on the base unit.
•If you misdial, press (CLEAR) and enter the correct number.
•You can enter a total of 44 digits.
Press (Save key).
3
á
•A beep sounds.
•To return to the standby mode, press (OFF).
* Pager companies require a delay after the pager number and the PIN
code are dialed. Contact your pager company regarding the required
pause time. Pressing
delay and counts as one digit.
•If the line has rotary or pulse service, press (TONE) between the pager number
and (REDIAL/PAUSE) in step 2.
•Alphanumeric voice dispatch pager services will not work with this function.
(REDIAL/PAUSE)
(REDIAL/PAUSE)
(REDIAL/PAUSE)
once creates a
(REDIAL/PAUSE)
twice.*
once creates a 3.5 second
59