Transferring A Call - Panasonic KX-TG2356C Operating Instructions Manual

PQQX14033ZA.book 47 ページ ２００４年６月２１日 月曜日 午後４時１４分

Transferring a Call

You can transfer an outside call to the base unit or the handset.
Handset
From the
Handset:
1
(1) During a call, press [HOLD/INTERCOM].
• The call is put on hold.
(2) Press Base.
(3) Wait for the paged party to answer, then
you can announce the transfer.
• After the paged party answers, "Intercom
hold" is displayed.
• If the paged party does not answer, press [C]
or [s] to return to the outside call.
2 Base unit:
Press [SP-PHONE] or [LOCATOR/INTERCOM] to answer the page.
Handset: To complete the transfer, press [OFF].
3
Base Unit
From the
Base unit: During a call, press [LOCATOR/INTERCOM].
1
• The call is put on hold.
• If the paged party does not answer, press [LOCATOR/INTERCOM] to return
to the outside call.
Handset:
2
Press [C], [s] or [HOLD/INTERCOM] to answer the page.
• You can also answer a call by pressing any buttons except [d], [B] or [OFF].
3 Base unit: To complete the transfer, press [SP-PHONE].
Base Unit
to the
Handset
to the
Line on hold.
Transfer to
Base
K
Hold
Calling Base
47