Table of Contents
Advertisement
PQQX14031ZA.book 50 ページ ２００４年６月２１日 月曜日 午後３時４４分
Transferring a Call
You can transfer an outside call to the base unit or the handset.
Handset
From the
Handset:
1
(1) During a call, press [HOLD/INTERCOM].
• The call is put on hold.
(2) Press Base.
(3) Wait for the paged party to answer, then
you can announce the transfer.
• After the paged party answers, "Intercom
hold" is displayed.
• If the paged party does not answer, press [C]
or [s] to return to the outside call.
Base unit:
2
Press [SP-PHONE] or [LOCATOR/INTERCOM] to answer the page.
Handset: To complete the transfer, press [OFF].
3
Base Unit
From the
Base unit:
1
(1) During a call, press [LOCATOR/INTERCOM].
• The call is put on hold.
(2) To page a specified handset, press its extension number [1] (
[2] (
).
To page all handsets, press [0].
After the handset user answers, announce the transfer.
OR
To make a voice announcement to all handsets, press [3] (
then speak into the MIC when the SP-PHONE indicator stops
flashing.
• If the paged party does not answer, press [LOCATOR/INTERCOM] to
return to the outside call.
Handset:
2
Press [C], [s] or [HOLD/INTERCOM] to answer the page.
• You can also answer a call by pressing any buttons except [d], [B] or [OFF].
3
Base unit: To complete the transfer, press [SP-PHONE].
• When the base unit user calls all handsets, only the handset user who answers
first can take the transferred call.
50
Base Unit
to the
Handset
to the
Line on hold.
Transfer to
Base
Handset
K
L
Hold
Calling Base
) or
),
Advertisement
Table of Contents
