Panasonic KX-TG2670N Operating Instructions Manual page 43

7 To turn the call group feature on, select
"On" by pressing
If not required, select "Off".
•When "On" is selected, the display and
ringer/charge indicator will light in orange and
a different ringer pattern will be heard.
Press (Next key).
8
Ö
•If you want to change the storing name,
number or group setting, press Ñ (Edit key)
repeatedly to reach the desired display and
change it.
Press (Save key).
9
á
•A beep sounds.
•To continue storing other items, repeat from
step 2.
•To return to the standby mode, press (OFF).
•If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number in step 5. This counts as one digit (p. 52).
•You can exit the programming mode any time by pressing (OFF).
•If the display shows "Directory full" in step 2, press (OFF) to exit the list.
To erase other stored items from the directory, see page 49.
•If 3 beeps sound and the display shows "Save error", move closer to the base
unit and start again from step 1
or .
Ü á
Set group
:On
IH G
=Next
Tom Jones
0987654321
F H
=Edit =Save
Tom Jones
0987654321
43