Transferring A Call Using The Intercom - Panasonic KX-TG2583 Operating Instructions Manual

During an intercom call:
•Intercom calls can only be ended with the handset.
•If the handset user has difficulty hearing the base unit user, decrease the
base unit speaker volume by pressing Ö on the base unit.
•If an incoming call is received, the intercom call stops and the unit starts to
ring. To answer, press (TALK) or (DIGITAL!SP-PHONE).

Transferring a Call Using the Intercom

The intercom can be used during a call. This feature enables you to
transfer a call between the handset and the base unit.
From the handset to the
base unit
Handset:
1
During a call, press
(INTERCOM/CLEAR)
the paged party after the
beeps.
•The call is put on hold and
"Intercom hold" is displayed.
•If the base unit user does not
answer, press (TALK).
2 Base unit:
When the paging party's
voice is heard, answer using
the MIC.
3 Base unit:
To answer the call, press
(DIGITAL!SP-PHONE)
•The transfer is complete.
From the base unit to the
handset
1
. Talk to
2
3
.
Base unit:
During a call, press
(LOCATOR/INTERCOM)
•The call is put on hold and
"Paging" is displayed.
•If the handset user does not
answer, press
(DIGITAL!SP-PHONE).
Handset:
Press
(INTERCOM/CLEAR)
answer the page.
•"Intercom hold" is displayed.
Handset:
To answer the call, press
.
(TALK)
•The transfer is complete.
.
to
53