Simrad RS10U Manual page 53

Table of Contents

Advertisement

Explanation of specific footnotes
a.
In the countries mentioned under 2, it is strictly prohibited to use this channel.
b.
This channel is not allowed to be used between Rhine km 150 and km 350.
c.
In the Netherlands, this channel is used by for its on-scene communi cations during
safety operati o ns on the North Sea, IJsselmeer, Wadden z ee, Ooster- and Wester-
schelde.
d.
This channel may also be used for piloting, mooring, tugging and for other nautical
purposes.
e.
This channel is the first ship-to-ship channel, unless the competent authority has
designated an other channel.
In the countries mentioned under 2, it is allowed that the output power is set to a value
between 6 and 25 W until 1 January 2005.
f.
In the countries mentioned under 2, this channel is used for service category ship-to-
port authorities.
g.
In the Netherlands, this channel is used by its national coastgu ard for communicati ons
during oil pollution operations on the North Sea and for safety messages for the North
Sea, Wadden z ee, IJsselmeer, Ooster- and Westerschelde.
h.
This channel may be used only for service category on-boardon board
communications.
i.
This channel may be used only for communications between sea going vessels and
participating land stations in case of distress and safety communica ti ons within the
maritime sea-areas. In the countries mentioned under 2, this channel may be used
only for distress, safety and calling.
j.
The output power shall be reduced automatically to a value between 0.5 and 1 W.
k.
This channel may be used for communications with a social charac ter.
l.
In the Netherlands and Belgium, this channel may be used for trans mit ting mes sages
concerning bunkering and victualling. The output power has to be reduced manually
to a value between 0.5 and- 1 W.
m.
This channel may also be used for public correspondence.
n.
This channel will be used for an automatic ship identifi cation and surveillance sys tem
(AIS) capable of providing worldw ide operating on seas and Inland Waterways.
o.
The availability of this channel is on a voluntary basis. All existing equipment shall be
capable to of operating on this channel within a ten-year period after the entry into
force of this Arrangement.
p.
After permission of the competent authority, this channel may be used only for spe cial
events on a temporary basis.
q.
In the Czech Republic this channel is used for service category nautical information.
r.
In the Czech Republic this channel is used for service category ship-to-port authorities.
Simrad RS10 Operation and Installation Manual
52

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rs10e

Table of Contents