Checklist - Simrad RS10U Manual

7-1 Checklist

The following items should be supplied in the box. Check before starting the installation and contact
your dealer if an item is missing.
Note: not
An antenna is
1. Mounting gimbal for the VHF radio
2. Power supply cable with in built 7 Amp
fuse
3. External speaker connection cable with
white (+) wire and black (-) wire
4. GPS connection cable (RS10 only)
5. Two mounting knobs
6. Microphone bulkhead mount
7. Four self-tapping screws for the mounting
gimbal
8. Four flat screws for the mounting gimbal
9. Four spring washers for the mounting
gimbal
10. Four plain washers for the mounting
gimbal
provided. Consult your Simrad dealer for advice if necessary.
1
2
3
4
Simrad RS10 Operation and Installation Manual
11. Four nuts for the mounting gimbal
12. Two self-tapping screws for the
microphone bulkhead mount
13. Two flat screws for the microphone
bulkhead mount
14. Two spring washers for the microphone
bulkhead mount
15. Two plain washers for the microphone
bulkhead mount
16. Two nuts for the microphone bulkhead
mount
17. Four M5x32 screws for recessed installation
18. Four nuts for the recessed installation
Not pictured: Two plastic stoppers for the
recessed installation. Installation template. One
7 Amp spare fuse in case of accidental reverse
of battery polarity. Base unit and microphone.
Protective cover.
5
6
17
18
35
7
8
9
10
11
12
13
14
15
16