Simrad RS10U Manual page 32

5-3-2 Receiving an Individual Call (INDIV)
RCV: INDIV
RS10
ENTER –> ACK
ESC –> EXIT
If the radio recognises the user MMSI as one of your buddies, the buddy's name is displayed in
place of the user MMSI.
2. The RS10U responds automatically but the RS10E prompts you to press ENT to acknowledge the
incoming call.
3. The caller should respond to your acknowledgement by making voice contact on the designated
channel. If this does not happen, you can press PTT to initiate voice contact instead.
The call data is stored in the Call Log (see Section 5-2-7).
5-3-3 Receiving a Group Call (GROUP)
RCV: GROUP
GP: RD GROUP
RS10
ROUTINE
2. You do not need to send an acknowledgement. If desired, press PTT to initiate voice contact on the
designated channel.
The call data is stored in the Call Log (see Section 5-2-7).
5-3-4 Receiving a Geographic Call (GEOGRAPH)
RCV: GEOGRAPH
RS10
10:34 UTC
ESC –> EXIT
The time and the user MMSI or name are displayed on the screen. If the radio recognises the user
MMSI as one of your buddies, the buddy's name is displayed in place of the user MMSI.
2. Monitor the working channel for an announcement from the calling vessel.
5-3-5 Receiving a Polled Position Call (POSITION)
RCV: POSITION
SAM
82º50.003'N
27º45.543'W
INDIV ACK
RS10
PRESS PTT
ESC –> EXIT
1. When you receive notification of a GROUP call, press any key to cancel
the alert. The radio automatically selects the channel designated in the
incoming call.
The priority level is always routine, and the group is identified on the
screen. The group will be one of the three groups of frequently called
people that you set up earlier (see Section 4-3).
A geographic call is received by vessels within a specific geographic
boundary area.
1. When you receive notification of a GEOGRAPH call, press any key to
cancel the alert. The radio automatically selects the channel designated
in the incoming call.
1. When you receive GPS position data from a buddy in response to your
LL request (see Section 5-2-9), you are recommended to make a written
note of the position, especially if it is a good fishing position.
If enhanced LL position information is available from your buddy, this is
shown on the screen until the screen display changes.
Simrad RS10 Operation and Installation Manual
1. When you receive notification of an INDIV
call, press any key to cancel the alert. The
radio automatically selects the channel
designated in the incoming call. INDIV
calls are almost always Routine priority.
31