Maintain Your Buddy List (Buddy List) - Simrad RS10U Manual

2-2 Maintain Your Buddy List (BUDDY LIST)

MENU SELECT
>BUDDY LIST
LOCAL/DIST
BACKLIGHT
2-2-1 Add an Entry
BUDDY LIST
> MANUAL NEW
ALEX
TOM
1. Select BUDDY LIST. The cursor is at MANUAL NEW. Press ENT.
2. Enter the buddy name, one character at a time (this may be alphanumeric) then press ENT
repeatedly until the cursor moves to the MMSID entry line.
4. Enter the MMSI associated with that buddy name (this must be numeric) then press ENT.
5. The new buddy name and MMSI are displayed. Press ENT to store the new entry, which is
displayed at the top of your buddy list.
Note that when the BUDDY LIST is full (20 entries), you cannot make a new entry until you have deleted an
.
existing entry
2-2-2 Edit an Entry
BUDDY LIST
> MANUAL NEW
ALEX
TOM
1. Select BUDDY LIST. Press ENT to display the list of entries.
2. Scroll down (if required) to the incorrect entry and press ENT.
3. Select EDIT. The cursor is at the first character of the name.
4. Edit the buddy name or, to edit only the MMSI, press ENT repeatedly until the cursor moves to
the MMSID line.
5. When you are finished, press ENT (repeatedly if necessary) to display the next screen.
6. Press ENT to store the changes. The buddy list is displayed again. If more changes are required,
repeat Steps 2 through 6. Otherwise, press ESC to exit.
Use the Buddy List to store the names and associated MMSIs of 20 favourite people.
Names are stored in the order of entry, with the most recent entry shown first.
The following sections show to use BUDDY LIST to add, edit, and delete entries on
your buddy list.
Section 3 explains how to call a buddy.
ENTER NAME
––––––––––––
ENTER MMSID
–––––––––
ALEX
> EDIT
DELETE
Simrad RS10 Operation and Installation Manual
ENTER NAME
BOB
ENTER MMSID
123456789
EDIT NAME
ALEX
EDIT MMSID
112233445
12
BOB
123456789
> STORE
CANCEL
ALEX
111223344
> STORE
CANCEL