Troubleshooting - Panasonic WORKIO DP-8060 Operating Instructions Manual

Troubleshooting

Unit Does Not Operate
Does the display light?
Does the Energy Saver key flash (or light) and
displays are turned OFF?
Does any of the U## codes and messages
appear on the display?
(U1, U4, U6, U7, U11....etc.)
Does the Add Staples indicator and message
appear on the display?
Does the Add Paper indicator and message
appear on the display? (
Does the paper misfeed indicator and message
appear on the display? (
Does E#-## indicator and message appear on
the display?
The machine would not accept the next job
during operation, instructed job would not be
accepted for a long time period or job would
not be completed.
Light Copies
Does the contrast indicator say "LIGHTER"?
Does the Add Toner indicator and message
appear on the display? (
38
Check
)
)
)
Action
Check if the Power Switches (Main Power Switch
on the back and Power Switch on the Left Side
of the machine) are turned ON and if the power
cord is plugged into the AC outlet.
Press Energy Saver key on the control panel.
(See page 15)
Perform actions in accordance with each
message.
Add Staples (See pages 57-61)
Remove all jammed staples. (See pages 58-61)
Add paper. (See pages 54-55)
Remove the misfed paper. (See pages 41-53)
Turn the Power Switch on the Left Side and the
Main Power Switch on the Back of the machine
to the OFF and ON. If the error code does not
clear, call your Service provider.
Turn the Power Switch on the Left Side and the
Main Power Switch on the Back of the machine
to the OFF and ON.
Touch the "DARKER" button.
Replace the Toner Bottle.
(See page 56)