Scanning The Document To Your Pc - Panasonic WORKIO DP-8060 Operating Instructions Manual

Network Scanner

Scanning the Document to Your PC

Scanned data will be directly transferred to your
PC. By using the optional installed software
(Panasonic Document Management System), you
can view or edit the scanned data on your PC.
1 Place Original(s) on the ADF or Platen
Glass.
Face Up
Up to 85 sheets* (20 lb/Letter)
*70 Sheets : Invoice/Legal/Ledger
●
When scanning from the ADF, read the Notice
for ADF. (See page 21)
●
When scanning from the Platen Glass, read the
Notice for Platen. (See page 21)
2
Press the Scan/File key.
26
Face Down
Align with top left corner
3 Select the destination (PC) for the
scanned data.
●
If the Panasonic Communications Utility software
is not started on your PC, a destination is not shown
on the Touch Panel Display.
4
Select the Scanner mode setting.
5
Press the Start key.
The scanned data will be transferred to the PC,
then the scanner reception notice appears on
the PC's monitor.
●
For more details, refer to the operating
instructions (for Quick Image Navigator) on the
provided CD-ROM.
Start Key