Troubleshooting - Panasonic DP-C406 Operating Instructions Manual

Troubleshooting

1Problem Solving
Unit Does Not Operate
Check
Is the display dark?
Does the Energy Saver key flash (or light), and is the
display turned OFF?
Do any of the U## code and messages appear on the
display?
(U1, U4, U6, U7, U11....etc.)
Do the Add Staples Indicator and message appear on
the display?
Do the Add Paper Indicator and message appear on
the display? ( )
Do the Paper Misfeed Indicator and message appear
on the display? (J##)
Does the error message "Remove paper from inner
tray" appear on the display?
Do E#-## Indicator and message appear on the
display?
The machine does not accept the next job during
operation, instructed job would not be accepted for a
long time period, or job would not be completed.
Light Copies
Check
Is the Density level set to the "Lighter" side?
Do the Add Toner Indicator and message appear on
the display? ( )
If the measures outlined above do not solve the problem, call the authorised Panasonic dealer.
Action
Check if the Power Switches (Main Power Switch on the
rear and Power Switch on the left side of the machine) are
turned ON and if the power cord is plugged into the AC
outlet.
Press the Energy Saver key on the Control Panel.
Perform operations in accordance with each message.
(See page 6)
Add staples. (See page 34 or 38)
Remove all jammed staples. (See page 34 and 36)
Add papers. (See page 23)
Remove the misfed paper. (See pages 10 to 21)
Remove the paper from inner tray.
(For the capacity of Inner Tray, refer to Specifications in
the Operating Instructions (For Basic Operations) of
provided booklet.)
Turn OFF the Power Switch on the left side and the Main
Power Switch on the rear of the machine, and then turn
them back ON. If the error code has not been cleared, call
the authorised Panasonic dealer.
Turn OFF the Power Switch on the left side and the Main
Power Switch on the rear of the machine, and then turn
them back ON. If the machine still does not accept the next
job, call the authorised Panasonic dealer.
Action
Select "Darker".
Replace the Toner Cartridge.
(See page 26)
3