Multi-Tasking Job Table - Panasonic WORKIO DP-8060 Operating Instructions Manual

Multi-Tasking Job Table

Current Job
2nd Job
Copy
Copy
Concurrent Copy*
Storing Document
Printing
Network Scanning
Storing Document
GDI/PCL/PS Printing
Receiving Data
Printing Receive Document
Facsimile (Sending)
Storing Document
Memory Transmission
Facsimile (Receiving)
Memory Receiving
Printing Received
Memory Data
: Accepts and executes 2nd Job.
: Accepts and executes 2nd Job (Copy) only if Current Job has been interrupted.
: Accepts 2nd Job and executes the 2nd Job after Current Job has completed.
: Accepts 2nd Job (Concurrent copy printing) and executes the 2nd Job after Current Job (Printing from PC data) has stopped, or at the end of a printing Copy (Electronic/Rotate/Shift/
Staple Sort) or the end of a printing Group (Rotate/Shift Stack). After 2nd Job has completed, the remains of Current Job will restart.
For example:
Current Job (PC print): 2 pages x 2 copies with staple sort; 2nd Job (Concurrent Copy): 1 page
> After one operator sets Current Job, another operator sets 2nd Job.
: Not accepts the 2nd Job.
: None
NOTE
∗
: Additional 16MB (minimum) Image memory are required.
72
Concurrent Copy* Network Scanning
Copy
Storing Printing Storing
Document Document
2 pages print stapled (PC print);
GDI/PCL/PS Printing Facsimile (Sending)
Transmission Receiving Printing Storing
to PC Data Received Data Document
*
1 page prints (Concurrent Copy);
Facsimile (Receiving)
Memory Memory Printing Received
Transmission Receiving Memory Data
2 pages print with staple (PC print)