Removing Misfed Paper; Locations/User Error Codes (J Codes) - Panasonic WORKIO DP-8060 Operating Instructions Manual

Removing Misfed Paper

■ ■ ■ ■ ■ Locations/User Error Codes (J Codes)
DA-FS330 DA-FS355
DA-FS355A
H
Jam Location
Misfed Indicator
● Indicates to open each cover, check
and remove any misfed paper.
Code Check Points
J00 Sheet Bypass (Remove the misfed paper,
and then open and close the cover)
J01, J17, Paper Tray 1 and Paper Feed Section
J21 (Paper Tray 1-4 and Sheet Bypass)
J02, J22 Paper Tray 2 and Paper Feed Section
(Paper Tray 2)
J03, J23 Paper Tray 3 and Paper Feed Section
(Paper Tray 2-4)
J04, J24 Paper Tray 4 and Paper Feed Section
(Paper Tray 3, 4)
J07, J08, Paper Feed Section
J09, J27, (Paper Tray 2 and Optional Paper Tray 3
J28 and 4)
J06, J16, LCT Section
J26 Paper Feed Section
J18, J33 Paper Feed Section
(Paper Tray 1-4 and Sheet Bypass)
Verify that the media type selection in the
control panel matches the media loaded on
the trays.
Ex: Select "Transparency" when Transparencies
are loaded in the Sheet Bypass
DA-FS600 DA-FS605
H H
I
Copier
ADU
Paper Feed Unit
LCT
Finisher
i-ADF
J
D C
H
B
E
I
F
G
A
A: System Console (See page 42)
B: Paper Entry Area (See page 43)
C: Paper Transport Area (See page 44)
D: Paper Exit/Fuser Area (See page 45)
E: ADU Area (See page 46)
F: Reverse Area (See page 47)
G: 3000-Sheet Tray (LCT) Area (See page 47)
H: Finisher (See pages 48-50)
I: Saddle-Stitch Finisher (See pages 51-52)
J: i-ADF (See page 53)
Code Check Points
J19 Paper Feed Section and ADU Section
J29 System Console Section
J82, J83, ADU Section and Fuser/Exit Section
J84, J85,
J88
J30, J31, Paper Feed Section and Fuser/Exit Section
J40,
J42-J45
J41, J50, Fuser/Exit Section and Paper
J51, J52, Transport Section
J53, J86
J80, J81, Fuser/Exit Section
J87
J54-J55 Paper Transport Section
J60-J64 Optional Finisher Section
J70-J79 ADF Section
J92-J94
● The display indicates the section of the
misfed paper. Remove the misfed paper
and check to see if the misfed location
indicator has been cleared. If other
locations indicate presence of paper,
remove them and check the display again.
● If an unknown error code appears, or
cannot clear the error codes, switch off
the machine and contact the authorized
Panasonic dealer.
41