Panasonic WORKIO DP-8060 Operating Instructions Manual page 55

■ ■ ■ ■ ■ Sheet Bypass
1
Sheet Bypass
2
●
Slide out the tray until it stops.
3
●
Approximately up to 50
●
Letter size sheets/20 lb
●
Paper Weight: 15-35 lb
●
To add paper to the Sheet Bypass, remove
the leftover paper from the tray, and align it
with the added paper and load them together
onto the tray.
●
Load the paper with the unprinted side facing
upward.
●
Do not exceed limit mark when loading paper.
4
Side Guides
Adjust
●
Incorrect adjustment may cause the paper to
wrinkle, misfeed or skew.
●
If the paper size is not detected, remove
paper and press Reset Key. Then, load the
paper again.
■ ■ ■ ■ ■ Paper Tray (3000-Sheet Tray (LCT)
(Option))
1
Paper Feed Tray
●
Do not touch the tray while it is moving.
2
Face-Up
●
After tray stops, place paper neatly on the tray.
Letter size only (Portrait).
●
Letter-R/Legal size is available when optional
Letter-R/Legal Size LCT Adapter (DA-TK31)
is installed.
3
Overfill Indicator
●
Paper Capacity: 3000 Sheets (20 lb)
4
2
1
Close
55