Section 2 - Rigging Installation - Pro Boat Endeavor Owner's Manual

Section 2 – Rigging Installation
8. Carefully unwrap the top, side rigging
lines.
9. Insert the side rigging line into the
outer hole in the spreader as shown.
: The spreader has a small notch
Note
in the outer hole. The inner hole will
not be used, making it easier to insert
the line. Simply push the rigging line
through the slot.
10. Open the rigging clip and attach it to
the eye plate marked "C, D." Close the
wire clip.
11. Carefully unwrap the mid-line rigging
marked "D."
12. Open the rigging clip and attach it to
the eye plate marked "D." Close the wire
clip.
6