Connecting To A Host Pc; Connecting To The Ethernet Lan; Connecting To Usb Host Or Hub - VeriFone MX 880 Installation Manual

Connecting to a
Host PC
Connecting to the
Ethernet LAN
Connecting to
USB Host or Hub
20
MX 800 S I
ERIES NSTALLATION
To connect the MX 800 Series terminal to a development PC, see
which shows a USB connection with the 23741-02-R multiport cable. Note that
USB drivers are required to support this configuration..
TIE-DOWN STRAP
MX 800
TERMINAL
MULTIPORT
CONNECTOR
Figure 17 Host PC Connection
To connect the MX 800 Series terminal to an Ethernet LAN through the Ethernet
port using a standard Ethernet cable, insert the LAN cable from the LAN router or
hub into the Ethernet port on the multiport cable.
Connecting to a USB host or hub requires VeriFone USB cable (P/N 23741-02-R).
To connect to a USB host or hub:
1
Insert the multiport cable plug into the bottom socket on the terminal, secure
with the tie-down strap, and route the cable through the slots to the desired
exit side.
2
Plug the USB connector of the multiport cable into the USB host or hub.
G
UIDE
HOST COMPUTER FOR
DOWNLOADS OR DEBUGGING
USB PORT
Figure 17,